Spektrum RC S1400 G2 AC LiPo Smart Charger (6S/20A/400W)

The Spektrum S1400 Smart G2 AC Charger provides 400 watts of fast, easy charging for all modelers, especially using Smart G2 batteries — with Auto Charge simplicity, one-connection balancing, IC3® or IC5® output ports for adapter-free convenience, and more.

The Auto Charge feature recognizes your Smart battery’s parameters, such as chemistry type and charge rate, and begins safe, correct charging automatically when the charge lead is connected. A clock on the charger’s screen counts down the time until your Smart battery is fully charged and ready to use. The S1400 charger will balance your Smart G2 LiPo packs through the same, single IC connection used for charging. No separate, confusing balance leads are required. An  updated interface features fresh, intuitive menus, icons, and navigation tools. The S1400 Smart G2 AC Charger also includes an ON/OFF switch, cooling fan, detachable power cord, and sleek case with rubber grips that fits perfectly on your workbench and in your pit or field bag.

• Allows hyper-fast charging with up to 400W power
• Charges AND balances Smart G2 batteries with one simple IC3® or IC5® connection — no separate balance lead needed
• Auto Charge recognizes Smart battery charging parameters and begins safe, accurate charging automatically when connected
• Charges virtually any RC battery (use Smart batteries to benefit from all charger features)
• Smart software tracks and stores numerous Smart battery data
• Includes IC3® and IC5® charging output ports — no separate adapters required to charge different Spektrum™ Smart batteries
• An on-screen clock counts down remaining charge time until your Smart battery is fully charged and ready to use
• Updated user interface features fresh, intuitive menus, icons and navigation tools, plus non-slip, easy to use buttons
• USB input and output ports are included for updating firmware and charging secondary devices
• ON/OFF switch eliminates the need to plug in and unplug the power cord for on/off control
• Detachable power cord makes transporting more convenient
• Includes an efficient, low-noise cooling fan
• Sleek, sturdy case fits well on a workbench and in pit or field bags
• Handy rubber grips on case make it easier to plug in and remove batteries
• IC3® and IC5® connectors are backwards compatible with EC3™ and EC5™ connectors

Thermal Protection: Yes

Battery Temperature Monitoring: Yes

Maximum Charge Rate: 400W

Maximum Continuous Discharge Rate: 1.5A

Over Current Protection: Yes

Cooling Method: Fan

Number of Cells: 1 – 6S LiPo, LiIon, LiFe, 1-16 cell NiMH, NiCd, 1-12 cell Pb

Product Height: 4.13″ (105 mm)

Application: RC Model Battery Charger

Overload Protection: Yes

Selectable Charge Rate: Yes

Product Length: 5.7″ (145 mm)

Product Weight: 35.9 oz (1015g)

Technology: Smart

Hard Case: Yes

Normal/Standard Charge Current: 0.1 – 20.0A

Peak Detection: Yes

Short Circuit Protection: Yes

Display: 2.8″ LCD

Input Voltage: 100-240V AC

Reverse Polarity Protection: Yes

Voltage Meter: Yes

Output: 1x400W

Product Width: 5.66″ (144 mm)

Charge Protection Circuitry: Yes

Safety Timer: Yes

Output Connector: IC3 and IC5 (Selectable)

Low Input Voltage Protection: Yes

Amp Meter: Yes

Software Updates: Yes

Battery Balance Connector: JST_XH

Integrated Balancing: Yes – Internal Balancer & Internal Adapter

Maximum Charge Current: 20.0A

Programmable: Yes

• (1) S1400 Smart G2 AC Charger
• (1) Power Cord
• (1) Manual